single-loop temperature controller / with LCD display / hot runner

Th-m6 is provided with important technological improvements in relation to the other models present in the market. This temperature controller is available in 6 and 12 zones and its distribution price is very competitive.

Operation
Key features:

* Synchronous heating of all the zones despite the different thermal inertia: the delay in the heating start of the nozzles is no more required.
* Autoslave in case of TC failure: each zone can be linked to another with similar thermal behaviour. This is a more accurate alternative to the open loop mode (manual mode)
* Plastic leakage alarm: with a continuous monitoring of the power consumption, the leakage from a nozzle is detected and major damage due to the plastic leakage can be avoided
* Collective modification: temperature setting and all the control and alarms parameters can be modified at once on all the zones by pressing a button on the frontal panel
* Immediate and complete diagnostic: 6 led per zone indicate all the possible failures in the heating loop. In detail the controller recognizes and displays: thermocouple errors (breaking and inverted connection), fuse, heater and solid state relay faults, phase voltage missing
* 16 A max. per zone (3500 W) also contemporary, thanks to the high performance, self ventilated heat sink
* Heaters drying with single phase modulation
* Output powers are not synchronous in order to avoid peaks in power supply line
* 2 independent set points